NP Process Oils are manufactured from premium quality hydro-treated base oils. They are suitable for general-purpose lubrication where non-additive oils meet the lubrication requirements.
These oils offer the following benefits:
Reciprocating air compressors with air discharge temperatures up to 100 oC.Heat transfer fluid for closed heat transfer systems up to 320 oC.As plain and rolling element bearings, spur, bevel, helical and worm gear box lubricants, where temperatures and loadings are light to moderate.General machine lubricants where straight mineral paraffinic oils are recommended.
The low viscosity grades (ISO V.G. 22 to 46) find general economic applications as:Non-compounded light coloured sewing machine lubricantsAir line lubricantsVacuum pump lubricants
|Kinematic Viscosity @ 40°C, cSt||22.0||32.00||36.50||46.00||64.0||100.00||150.00|
|Kinematic Viscosity @ 100°C, cSt||4.24||5.37||5.85||6.78||8.39||11.00||14.41|
|Pour Point, °C||-12||-6||-6||-6||-3||-3||-3|
|Flash Point (PMCC), °C||216||218||220||224||227||251||251|
|Specific Gravity @ 60°/60°F||.8636||.8685||.8734||.8727||.8787||.8784||.8854|
|Emulsion at 82°C, Separation time, (mins)||1||5||6||8||15||10||15|
|Kinematic Viscosity @ 40°C, cSt||220.0||320.00||460.00||640.0||1000.00||1500.00|
|Kinematic Viscosity @ 100°C, cSt||18.50||23.97||30.12||37.30||44.30||50.12|
|Pour Point, °C||-3||-3||-3||-3||-3||-3|
|Flash Point (PMCC), °C||257||257||257||268||266||266|
|Specific Gravity @ 60°/60°F||0.8895||.8939||.8974||.9092||.9234||.9268|
|Emulsion at 82°C, Separation time, (mins)||15||–||–||–||–||–|
NP Process Oil is unlikely to pose any health or safety hazards when used in the recommended applications, provided good standards of personal and industrial hygiene are observed. Please refer to Material data Sheet (MSDS) for further information.
Revision Date 10/06/09